Bosch 3727Devs Random Orbit Variable Speed Polisher

When you’re searching for the best of the best look no further than these three random orbital sanders form Festool, Bosch and, Porter-Cable. With not common innovation and the stamp of lasting, trailblazing manufacturers, these models will breath new life into your sanding projects while also energizing users with smooth, high-performance.

Festool’s ETS 125 EQ random orbit sander is a stunning and highly effective sanding machine. Serious woodworkers veritably rejoice at this high-performance, sander that, while small, performs like a miracle to smooth out all of your rough patches. Ideal for one-handed sanding, the tool is exceedingly lightweight at only 2.4 lbs. Because of this lightweight and the sander’s compact design, the tool is perfective for sanding from any position – extended vertical and overhead work is far less strenuous while likewise yielding uncommonly smooth results. With the finest sanding stroke at 5/64″ (2.0mm) the 125 leaves both pre-sanding and finishing jobs astoundingly flush and smooth, and with a shockingly effective jet-stream dust extraction system, the tool delivers clean finishes and always clean operation. With a meticulously concentrated stream of air, this scheme ensures smoother, more flawless finishes and increments the life of your pads, abrasives, and the tool as well. The sander is highly balanced with low vibration for smooth operation and superfine finishes, and with variable speeds and a fast break stop, the tool is simple to control allround any degree of use. It is hard to put this tool down and even harder to pick up another once you’ve experienced the Festool difference.

On another hand, Bosch’s 3725DEVS random orbit sander/polisher is one of the more veritable tools on the market today providing craftsmen a multipurpose power tool that out performs much of it is competition. The sander features a pad that both orbits and rotates to duplicate meticulous hand-sanding for the most smooth, utterly blended surface finishes. The tool has an impressive 3.3 amp motor with variable speeds ranging from 4,5000 – 12,000 OPM. This ensures you’ll always have the most adequate speed to compliment each workpiece or task. Being smooth and powerful, the sander is idealisti for both delicate fine finishing, or aggressive removal, and built with a die-cast aluminum gear housing and exclusive dual-bearing pad mount, the 3725DEVS is long-lasting and offers exceedingly low vibration operation. Additionally, it is through-the-pad dust extraction system sucks dust and debris away from the work surface to heighten precision and fine-finishing; by consequence, it likewise increments tool and accessory longevity. The tool is comfortable to operate and it is front handle may be effortlessly got rid of to provide more outstanding sanding access in corners and tight spaces.

Additionally, Porter-Cable’s 390K (5″) low profile random orbit sander kit is a veritably dreamy little sander. Providing craftsmen with optimized power, speed, and control over the most delicate and most aggressive projects the tool is as versatile as it is handsome. Its 3.5 amp motor utilizes EnduraTech technology to extend the tool’s life by a rather awful margin and likewise ensures optimal performance and durability for the life of the tool. The sander’s low profile design brings the body of the sander much closer to the workpiece constructing a brilliantly smooth finish and providing you, the operator, with superior contact and control. The tool has variable speed settings from 7,000 – 12,000 OPM for the most optimized remotion rate, and a systematically brilliant finish to a potpourri of materials. The tool’s mechanical brake pad dramatically reduces spin-down time fundamentally eliminating the gouge factor from your projects, and with highly effective dust collection options, ultra smooth finishes, and comfortable ergonomics, the sander is, well, a miracle machine.

Experiencing the high-performance of these random orbital sanders is something each craftsmen ought to strive for. Not only are these models smooth and comfortable to operate, but they yield without disruption gorgeous results that will impress and gladden you with each use.

The Bosch 3727DEVS Random Orbit Variable Speed Sander/Polisher includes: Bosch’s heightened random-orbit sanding action and trademarked Constant Response Circuitry safeguard your work surface. View larger. Enhanced Random-Orbit Sanding Action for a Clean Finish Whether you’re stripping old furniture or prepping new molding for installation, the 3727DEVS delivers aggressive stock remotion and a clean, swirl-free finish. Free rotation and a 5/32-inch eccentric orbit diameter (5/64-inch offset) grant the sander’s pad to duplicate a natural, hand-sanding action and ensuring that abrasive material never follows the same path twice. This heightened random-orbit action combines with Bosch’s distinguishable integral pad dampening scheme to keep your workpieces free of swirl marks. Versatile, Powerful 3.3-Amp Motor for Fast, Smooth Results The 3727DEVS’s 3.3-amp motor provides the power you need to remove stock quickly and efficiently, making fast work of difficult jobs. Bosch’s trademarked Constant Response Circuitry maintains continuous motor speed no matter how tough the job, providing overload shelter and delivering a reduced-torque soft commence that safeguards your work surface. A variable-speed dial lets you adjust from 4,500 to 12,000 OPM for job-specific performance. The 3727DEVS’s microcellular backing pad contours for a smooth, fine finish on all types of surfaces. Since the 3727DEVS uses industry-standard six-hole, six-inch hook and loop disks, you never have to waste time searching for expensive, proprietary abrasive disks, and you never have to deal with messy adhesives. Ergonomic, Long-Life Design for Extended Use With a tapered, soft-grip top and ergonomic front and rear handles, the 3727DEVS offers multiple grip positions to support prevent user fatigue. The front handle may be got rid of without apparent effort for sanding in tight spots, and the conveniently placed trigger features a lock-on button for ease and control for the duration of extended periods of use. The 3727DEVS also features rugged, die-cast aluminum gear housing and an exclusive dual-bearing pad mount that does away with wobble and vibration, extending the life of your tool and bettering your comfort. Dust Canister for Safety and Convenience The included Bosch microfilter dust canister with integrated paper filter provides an optimal scheme for filtering fine dust. The canister traps corpuscles as little as a 1/2 micron in diameter, and it reduces your exposure to potentially destructive molecules by gathering more dust than other leading brands. The compact Bosch 3727DEVS weighs just 5.2 pounds. It is backed by a one-year warranty, 30-day money-back guarantee, and one-year service shelter plan. What’s in the Box Bosch 3727DEVS Random-Orbit Variable-Speed Sander/Polisher, microfilter dust canister (RS026), soft backing pad (RS6045), removable front handle, 5-millimeter hex pad wrench, and sanding disk. The Bosch 6-inch random orbit sander/polisher is a multi-purpose, variable speed tool with a powerful 3.3 amp motor that ensures particularly smooth results no matter what surface you’re working on. Its pad both orbits and rotates, duplicating natural hand-sanding action for a finish that looks like you expended all day and a whole lot of elbow grease. Chock full of performance and comfortableness features, this sander/polisher is designed for ease and reliability. The 3727DEVS has a rugged, die-cast aluminum gear housing with a Bosch exclusive dual-bearing pad mount that does away with wobble and vibration — plus an integral pad dampening scheme that helps prevent swirl marks for a fine, consistent finish. Its high-performance microcellular backing pad conforms to the contours of your workpiece, and the through-the-pad dust extraction scheme pulls dust away from the work surface to maximize sanding efficacy while extending your paper’s life. This sander/polisher likewise offers Constant Response circuitry, which maintains uninterrupted speed underneath load and provides overload protection. But it’s not all work and no ease of use. The 3727DEVS is styled to be tame on your hands because a firm grip means more precision and better accuracy. The tapered soft-grip top matches your natural hand angle, and the ergonomic handles concede multiple grip positions in order to prevent fatigue. The front handle even comes off, so it’s more comfortable to sand in tight spots. And the 3727DEVS is as comfortable to operate as it is to hold; it is soft-start function reduces start-up torque for smoother performance, and the trigger has a lock-on button for long projects. Best of all, the Bosch microfilter dust canister has an integrated paper filter that captures dust molecules as little as 1/2-micron in diameter, so there’s less debris to block your view and clog your paper. This sander/polisher uses 6-hole, 6-inch hook-and-loop discs, and it’s double-insulated. Rated at 120 volts, the 3727DEVS has an eccentric offset of 5/64-inch. It operates from 4,500 to 12,000 rpm. This kit includes a pad wrench (5mm hex), soft backing pad, sanding disc, and a microfilter dust canister. Applications Excellent for a wide potpourri of purposes, this sander/polisher will become a favored go-to device in your workshop or garage. It removes stock and finishing material quickly, without scratching — making it perfective for most sanding jobs, from wood floors to furniture finishing. With a buffing pad, it likewise buffs and polishes automobiles and boats to a professional-looking shine. What’s in the box Bosch random orbit sander/polisher, pad wrench, soft backing pad, sanding disc, microfilter dust canister. The 3727DEVS features a powerful 3.3 amp motor with 4,500 -12,000 opm. It has eccentric orbit plus rotation which duplicates natural sanding action. Medium hook & loop backing pad conforms to surfaces and lasts up to 5 times longer than established pads. Integral pad dampening and electronic variable speed provide a consistent finish. The new BOSCH micro filter collects up to 120 percent more dust than established dust bags. Unit also features exclusive dual bearing mounting scheme and die- cast housing control pad alignment to eliminate wobble and vibration. Removal of auxiliary handle for close quarter work. Includes micro filter dust canister, medium backing pad, sanding disc and wrench.

Bosch 3727devs Random Orbit Variable Speed Polisher Image

Bosch 3727devs Random Orbit Variable Speed Polisher Picture

Bosch 3727devs Random Orbit Variable Speed Polisher Pic

Bosch 3727devs Random Orbit Variable Speed Polisher Picture

Most helpful client reviews

23 of 23 people found the following review helpful.
Bad Boy of orbitals
By OHtoolman
I’ve had this sander a couple of months now. It’s magnificent for more spectacular jobs, as you may get both hands on the tool, crank up the power and actually get some a$$ behind it when needed, yet still sand more delicate items by decelerating the speed down. It’s size is both good and bad. On the downside, if you are sanding items which require you to hold the item with one hand and the sander with the other it is more or less difficult with this sander as it is primarily a two handed tool. Also this sander is more spectacular than palm sanders and can not get in numerous littler areas. I’ve applied it now and then for various hours at a time and have found it to be comfortable to use. It is adequately powered. The dust collection is better than the other sanders i have, and the huge bag fills quickly. My only complaint is that right in the center of the sanding pad is regarding a 1 inch hole with a little bolt to hold the pad onto the sander. This hole, being so large, makes it out of the question to round corners with this sander. Bosch could have bettered this easily. (the reason for four rather of five stars) This is a outstanding investment if you do a lot of sanding and need a step above a palm sander, but keep your palm sander handy for rounding corners!

22 of 22 humans found the following review helpful.
Years of dependable service
By Robert E. Walker
I have owned the 3725 since it was introduced in the mid to late 90′s and have been very happy with it’s performance and dependability. I am an architectural finish carpenter (collumns, arches, wainscaoting, etc…) and this sander gets heavy use at least 3 days each week. I have substituted the hook and loop pad 4 times and worn out the anti swirl ring years ago (I either begin the sander once placed on the material or place the sander on the material where it will be trimed “snipe area”). With the right paper this sander may be employed for heavy stock remotion as well as final sanding. I constantly use the variable speed option and find myself working the sander one handed. For heavy stock remotion or fine remainder it’s nice to be competent to use both hands.

See all 37 client reviews…