Factory Reconditioned Bosch 11247 Rt 16 Inch Combination

Factory Reconditioned Bosch 11247 Rt 16 Inch Combination

The Bosch 11247 is a Factory Reconditioned 1-9/16 inch 2-Mode Spline Combination Rotary Hammer. The tough new spline drive combining hammer offers dual mode operation for hammering with or without rotation. The Bosch 11247 features a 10 Amp motor that provides 400 RPM and 3000 BPM and delivers 5.2 ft-lbs of energy with each impact. This Spline Drive Rotary Hammer has an integrated clutch to support minimize torque reaction and Vario-Lock positioning that rotates and locks chisels into 12 dissimilar positions to optimize the working angle. The rotary hammer is 17-1/4 inches in length, weighs 13.6 lbs and has a greatest or most complete or best possible bit size of 1-9/16 inches.   Features: Spline/round hex bit scheme tool-free bit changes, with automatic bit locking “Combination” dual mode selector 2 modes of operation, rotary hammer and hammer only mode Vario-Lock positioning rotates and locks chisel into 12 dissimilar positions to optimize working angle Innovative service modules designed so a qualified service technician may speedily replace the brushes and cord 360° Auxiliary handle provides a wide range of motion along with operator ease Integral clutch helps denigrate torque reaction What’s In the Box: Bosch 11247 Factory Reconditioned 1-9/16 inch 2-Mode Spline Combination Rotary Hammer

This is a reconditioned power tool. Reconditioned in general means that the tool has been returned to the manufacturer, who brings the tool back to like new conditions. Some tools may integrate cosmetic blemishes. This tough new spline drive combining hammer offers dual mode operation for hammering with or without rotation. It features a 10-Amp motor that provides 400 rpm and 3,000 beats per minute and delivers 5.2-Feet-Pound of energy with each impact. It has an integrated clutch to support minimize torque reaction and Vario-Lock positioning that rotates and locks chisels into 12 dissimilar positions to optimize the working angle. This hammer is 17-1/4-Inch in length, weighs 13-3/5 Pound and has a greatest or most complete or best possible bit size of 1-9/16-Inch.

Factory Reconditioned Bosch 11247 Rt 16 Inch Combination Pic

Factory Reconditioned Bosch 11247 Rt 16 Inch Combination Picture

Factory Reconditioned Bosch 11247 Rt 16 Inch Combination Pic

Factory Reconditioned Bosch 11247 Rt 16 Inch Combination Picture

Most helpful client reviews

1 of 1 people found the following review helpful.
dead but not forgotten
By Henry H. Shapiro
Held up well for 2 years, but now needs a $300 repair, so ordered a new reconditioned one. I guess thats not a bad run, was well used!

2 of 6 humans found the following review helpful.
Spline drive is antiquated
By T. Holwager
It’s time to come into the 21st century and stop using old technology. This Bosch tool is blown away but SDS technology. The Hilti drills run circles around this. The Hilti TE-35C is lighter, more powerful and has a longer life.

1 of 17 people found the following review helpful.
Best on the Market
By Mike Thompson
I have yet to find another tool by any manufacturer that impresses me as much as Bosch tools, they have the best tools in the industry. I’m impressed everytime I use these tools. Highly recommended!

See all 3 client reviews…