Campbell Hausfeld

Investing in quality tools and machines is always a good idea. A Campbell Hausfeld air compressor surely qualifies as one of those quality items, and for good reason. This company is known for their high standards of fabricating excellence, and have been at it for a long time. The company was started in 1836, and they have been formulating air compressors since 1940. Air compressors in standard are beauteous straight forward machines. They have tanks that hold pressurized air that may be called on when necessitated to run a wide potpourri of air-powered tools. Let’s take a closer look at the set up and operation of the Campbell Hausfeld air compressor.

First things first, like with all power tools, it is critical that you remunerate close attention to the provided safety guidelines and instructions. When followed, your new Campbell Hausfeld air compressor may be expected to serve you faithfully, and without incident, for a very long time. Basic maintenance and care is the word of the day.

A Campbell Hausfeld air compressor operates on a ordinary household circuit and are wired to be the right way grounded. The electric motor has a built-in overload switch that will shut the motor off ought to the an overload condition occur. The overload switch may be reset by pushing the red button. It is commended that, rather than using an extension cord to reach further away from the compressor, you use a longer (or additional) air hose instead.

Any tube, pipe, or hose piping that you use with your new Campbell Hausfeld air compressor ought to have a PSI rating higher than 150 psi. There are commended minimum hose sizes. Up to 50 foot lengths you ought to use 1/2 inch. Greater than 50 feet requires the use of a 3/4 inch. Larger diameter pipe is always better than smaller.

Lubrication is required on some of these compressors. Some models come pre-loaded with oil, and other models require you to add the necessitated lubricant. Most models come with a plug in the oil fill that has to be removed. After filling to the proper level, install the breather that is included. Use SAE 30 industrial grade air compressor oil or full synthetic motor oil such as Mobil 1 10W-30. Do not use regular motor oil like 10W-30 because additives in regular oil may cause valve deposits and reduce pump life.

There is a break-in amount of time for the Campbell Hausfeld air compressor. First, grant it to run 30 minutes continuously so that the piston rings may seat properly. Next, open tank drain valve and turn the regulator valve all the way clockwise. Do not install a coupler or air hose in the outlet port. Plug the unit in, turn the pressure switch to the automati position and run for 30 minutes to break in the pump parts. For greatest or most complete or best possible pump life, drain and replace oil after the primary hour of run time.

Well, that’s pretty much it. Like a great deal of compressors, a Campbell Hausfeld is simple to run. It is a great piece of instrumentation that is very utile either at home or on the job. Thankfully, you may find units to suit closely any need. Whether you are just filling bike tires and blowing off the driveway, or are running sprayers and grinders, a Campbell Hausfeld air compressor is a great way to go.

Campbell Hausfeld

Includes 2-Gallon Twinstack Air Compressor and 2-in-1 Brad Nailer/Stapler Kit – FP209599AV, 2-in-1 Brad Nailer / Stapler, (500) Brad Nails, (500) Staples, (2) Allen Wrenches, Male Plug, 25-ft Recoil Hose, Female Coupler, Air Chuck, Inflation Needle, Inflation Needle Adapter, (2) Inflation Nozzles

The Campbell Hausfeld FP209599AV Inflation and Fastening Two-Gallon Air Compressor with Nailer Holder and Two-in-One Nailer/Stapler Kit provides everything you need for household inflation and nailing/stapling projects. This all-inclusive kit saves you time and cash over electrically powered tools, takes up less space, and is ready to go right out of the box.

This versatile, high-capacity compressor is your go-to tool for over 30 inflation and fastening jobs. View larger.

FP209599AV Inflation and Fastening Air Compressor Applications: Completing over 30 inflation and fastening projects Inflating car and bike tires Inflating sports balls Upholstery Air brushing Cleaning workbench areas and equipment Installing trim Building crafts

Air Power Completes Jobs Faster and Less Expensively
Whether you’re a do-it-yourselfer working around the house or in your garage, you’ll finish home repair and tire inflation jobs rapidly and without delay and less expensively with the FP209599AV Inflation and Fastening Two-Gallon Air Compressor with Nailer Holder and Two-in-One Nailer/Stapler Kit.

With this air compressor, you will be competent to reap the gains of inflation tools and air-powered fastening tools. Compared to electrically powered tools, air tools have significantly lower initial costs and notably longer lifespans. They likewise deliver more torque and higher RPM than their electric counterparts, which means they’ll support you get your work done more efficiently.

Perfect for a Wide Range of Applications
The FP209599AV Compressor is idealisti for over 30 inflation and fastening projects, including inflating car and bike tires, inflating sports balls, installing trim, air brushing, and cleaning your workbench area.

Arriving with seven-piece accessory kit and hose, the FP209599AV Compressor has everything you need to get started on your next job.

Designed with You in Mind
Designed to be user-friendly, the FP209599AV Compressor is a compact tool that’s easy to store and move. Complete with two one-gallon tanks for dandier stored air power, the oil-free compressor has an easy-carry, twin-stacked tank design

For further convenience, easy-to-read gauges are conveniently located on the compressor body for quick, exact air pressure monitoring. Additionally, an on-board holder keeps the included nailer close at hand.

Bonus Nailer/Stapler
In addition to a compressor, the FP209599AV Kit comes with the 323200AV Nailer/Stapler, which holds 100 brad nails or staples and uses 18-gauge 1/2- to 1-1/4-inch nails. This handy tool is idealisti for woodworking and furniture building, and is perfective for installing trim and building crafts such as picture frames.

The Inflation and Fastening Two-Gallon Air Compressor with Nailer Holder and Two-in-One Nailer/Stapler Kit is backed by a one-year warranty.

About Campbell Hausfeld: Making it Easier to Do it Like a Pro!
Campbell Hausfeld makes it more comfortable for you to finish your projects like a pro. The company’s history of creating quality merchandise started out in 1836, when it fictitious horse-drawn wagons and agricultural equipment. Today, the company offers a finish line of air compressors, air tools and accessories, inflators, nailers and staplers, paint sprayers, pressure washers, and more. Finish your projects quicker and more comfortable with Campbell Hausfeld.

What’s in the Box
Compressor; 25-foot recoil hose; two male plugs; air chuck; inflation needle; inflation needle adapter; two inflation nozzles; 2-in-1 nailer/stapler; brad nails; staples; two Allen wrenches; coupler; and plug.

The compressor without apparent effort inflates items such as tires and sports balls, while the bonus nailer/stapler comes in handy for trim, upholstery, and air brush work. (Click images above to view larger.)