|
The Makita BTD142HW affect driver is a great addition to any tool chest. While there are other affect drivers on the market, not a good deal of may compete with the a great deal of features and gains of this model. Below are listed 5 of the most essential distinct elements of this affect driver:
- The BTD142HW comes with a 4-pole variable speed motor which allows it to achieve dandier power at lower speeds than the more mutual 2-pole motors–thereby resulting in less wear and tear on the driver. Less wear on the driver will mean a longer and more problem-free life for the tool.
- A powerful 18 volt Lithium-Ion battery furnishes sufficient power to fabricate 1,280 in./ft. torque which may handle the toughest of jobs for a hand-held tool, but will not be so powerful that it is dangerous to use. In addition, this battery provides a much longer run time, a slower self-discharge, and a super fast re-charge time of only 15 minutes. The charger also has an embedded memory chip which allows continuous communicating amidst the charger and the battery for the most effective possible charge. Plus, a built-in fan provides cooling for the battery which helps prolong the battery’s life.
- Variable speeds from 0-2,300 r.p.m (revolutions per minute) and variable affect power ranging from 0-3,200 i.p.m. (impacts per minute) allows you to accomplish a wide range of jobs just by adjusting these two settings. Anything from lightweight work to heavy-duty fastening is possible with this driver.
- The Makita driver has been ergonomically designed with the ease of the user in mind. A soft handle grip, along with a battery that weighs 40% less than Ni-Cd batteries, allows the BTD142HW to weigh in at only 2.8 pounds. Fatigue will not be a problem when fastening screws, drilling holes, or tightening lag bolts.
- Additional features include a built-in L.E.D. light on the drill which will help illumine the working area when sufficient light is not available. Plus, a phosphorescent bumper ring which glows in the dark will concede the driver to be found even in the darkest environs without further and added lighting. Lastly, the driver comes as a kit with two compact Lithium-Ion batteries, a 15 minute rapid charger and a commodious tool case for carrying the tool and accessories.
If you are a contractor, homeowner, mechanic, electrician, plumber, remodeler, or woodworker who is fascinated in having one of the best affect drivers on the market today, you will have to severely consider the Makita BTD142HW. Makita offers a 3 year warranty on the driver itself and a 1 year warranty on the batteries and charger.
Dewalt Dck275l 18 Volt Lithium Ion Impact
Heavy-Duty XRP 18V Hammerdrill / Impact Driver Combo Kit – DCK275L DCD970 XRP 18V cordless hammerdrill with patented 3-speed all-metal transmission and 1/2-Inch self-tightening chuck delivers 450 units watts out of greatest or most complete or best possible performance, more quickly application speed, and superior bit retention. DEWALT XRP exclusive Nano-phosphate lithium ion cells offer long battery life & durability: 2,000 recharges. Includes: 1 hour NiCd/NiMH/Li-Ion Charger, (2) 18V XRP Lithium Ion battery packs, 360° side handle, and contractor bag.
Featuring a pair of cordless tools that are both powerful and versatile, the DEWALT 18-Volt XRP Lithium Ion Hammerdrill/Impact Driver Combo Kit makes it easy to get to work and get jobs done quickly. Both tools feature balanced bodies that are easy to control, smart design details that concede for application-specific performance, and DEWALT’s XRP extended run-time battery system.
 |
18-Volt XRP Lithium Ion Hammerdrill/Impact Driver Combo Kit
At a Glance:
- 18-volt cordless hammerdrill with patented three-speed all-metal transmission
- 1/2-inch self-tightening chuck for drill bit retention
- 18-volt affect driver with heavy-duty, anti-kickback affect mechanism
- 1,330 inch-pounds of torque for a wide range of fastening applications
- Includes one-hour yellow top Lithium Ion charger, two 18-volt XRP Lithium Ion batteries, 360 degree side handle, and contractor bag
- Three-year fixed warranty, one-year free service, 90-day cash back guarantee
|
|
 |
|
The cordless hammerdrill delivers up to 34,000 beats per minute for huge hole drilling and framing. View larger. |
Take on a wide assortment of fastening apps with this affect driver.
View larger. |
LED sight suggests cut line |
Fast, Powerful Hammerdrill with Three-Speed Transmission
Built to deliver fast, authenti results, the DCD970 XRP 18-Volt Cordless Hammerdrill/Drill/Driver offers 450 unit watts out for effective drilling and fastening in a wide assortment of materials. Its patented, three-speed, all-metal transmission matches the drill’s performance to the task at hand, resulting in quicker completion of stubborn jobs, along with bettered run time and scaled down wear and tear on the tool’s motor.
This tool likewise offers a heavy-duty, 1/2-inch, self-tightening chuck with bit-gripping strength. When placed in hammerdrill mode, the tool delivers 8,500 to 34,000 beats per minute for making holes in masonry. In addition, an L.E.D. work light near the trigger provides increased visibility when you’re working in dark or confined spaces, and the tool’s well-balanced body and mid-handle, comfortable grip help keep you in control at all times.
Compact, Heavy-Duty Impact Driver
The DC825 18-Volt Impact Driver is capable of delivering 1,330 inch-pounds of torque for superb performance in a wide range of fastening applications. Its variable-speed trigger allows you to move amongst speeds ranging from 0 to 2,400 rpm and to deliver 0 to 2,700 impacts per minute for quick, results with minimum crusade pushing in the fastener as it sinks into the material.
In addition, this affect driver’s frameless motor features replaceable brushes for bettered durability and extended tool life. A durable, magnesium gear case and an all-metal transmission likewise bestow to the tool’s particular durability. And the driver’s heavy-duty affect mechanism directs torque to the fastener without causing the reactionary torque kickback seen when using a drill. This protects you, your tool, and your work.
Trademarked XRP Extended-Life Battery System
Two XRP Lithium Ion extended run-time batteries keep all of these tools running at optimal levels. They provide up to 40 percent more run time than ordinary batteries and over 2000 cycles for closely 2-1/2 times the life of traditionalisti nickel-cadmium batteries. Any XRP battery may be employed with any 18-volt DEWALT tool, which allows you to exaggerate your system by adding other DEWALT cordless tools (sold separately) as the demands of your occupation grow. In addition, the one-hour Lithium Ion charger helps maintain power to your packs all day long.
This 18-Volt XRP Lithium Ion Hammerdrill/Reciprocating Saw Combo Kit comes with a DEWALT warranty package that includes a three-year fixed warranty, a one-year free service contract, and a 90-day cash back guarantee.
What’s in the Box
DCD970 XRP 1/2-inch 18-volt hammerdrill/drill/driver, DC827 XRP 18-volt affect driver, one-hour yellow top Lithium Ion charger, two 18-volt XRP Lithium Ion batteries, 360 degree side handle, and contractor bag.
Keep the combo kit’s tools secure in the lasting contractor bag. |
Heavy-Duty XRP 18V Hammerdrill / Impact Driver Combo Kit – DCK275L DCD970 XRP 18V cordless hammerdrill with patented 3-speed all-metal transmission and 1/2-Inch self-tightening chuck delivers 450 units watts out of greatest or most complete or best possible performance, rapidly and without delay application speed, and superior bit retention. DEWALT XRP exclusive Nano-phosphate lithium ion cells offer long battery life & durability: 2,000 recharges. Includes: 1 hour NiCd/NiMH/Li-Ion Charger, (2) 18V XRP Lithium Ion battery packs, 360° side handle, and contractor bag.
Dewalt Dck275l 18 Volt Lithium Ion Impact Pic
Dewalt Dck275l 18 Volt Lithium Ion Impact Picture
Dewalt Dck275l 18 Volt Lithium Ion Impact Image
Dewalt Dck275l 18 Volt Lithium Ion Impact Image
Most helpful client reviews
43 of 44 humans found the following review helpful.
 Know What Your Getting
By North End Remodels
This is my third undertake at owning a compact drill/driver kit–I’ve owned the Bosch 10.8V and Milwaukee M12 combo kits antecedently and borrowed my tile setters Makita 10.8v kit, with the cool anvil type case, on a large total of jobs. The Bosch and Makita have their place, but not in my lineup and the Milwaukee disappointed me so badly, I have realized they are not the fabricated they applied to be, and I will most likely never buy a new Milwaukee tool again.
When I purchased my original compact kit, I was hoping to find a drill that was light, easy on the shoulder (if you’ve ever tried to use an 18v XRP drill with a to the full or entire extent extended arm and your older than 24, you know what I’m saying) and little sufficient to navigate in tight places. I necessitated a drill for doing trim outs, removing appliances, installing fixtures and just frequent light obligation work.
The problem a professional contractor will soon discover, these little drivers/impactors are so commodious and easy to use; you will start out pushing them to their limit speedily and get frustrated with the lack of power.
The key to being successful with one of the little kits, you have to recognize they will not and can not compete with the 18v tools, and none of the compact driver kits I have owned will drive 3″ screws with great success (I quintessentially screw my framing on little remodels and basement build outs, so I have a bit of experience here).
This DeWalt kit has the best power and remainder combining of the kits I’ve used. It will not fit into as tight of a spot as the Bosch and Makita, but it has the minimum power this contractor may live with.
I have employed the DeWalt on two jobs this month.
I installed new kitchen cabinets (20 boxes) and perfectly enjoyed using the affect driver for driving the wall screws and the drill for the drilling and screwing the boxes together, and I’m utterly positive, using the drill to install the hardware will be a joy.
Also, I just finished the demo and electrical rough in on a little reconstruct and I found myself reaching for the 12v more than the 18v.
My only real complaint, there is no bit storage on the tool. You don’t realize what you’ve got till it’s gone 
You won’t use these for framing, and cannot drill tile and concrete or set Tapcons(no rotohammer setting), but for lighter work, this set is awesome.
Quick charge time, dissent power and compact design gives this tool a permanent spot in my tool trailer.
This DeWalt kit is the best of what I’ve owned and applied to date.
11 of 11 humans found the following review helpful.
The perfective compact drill for women…and men
By J. Cullen
Pros:
- compact, short, lightweight = a joy to use
- slim handle is outstanding for littler hands (e.g. women, kids)
- one-handed chuck uses all types of bits
- good high end speed for drilling
- well balanced
- stands upright; belt hook
- comes with an affect wrench
- splendid battery life amongst uses
- comparatively inexpensive for further and added battery packs (30 USD)
- powerful sufficient for 98% of my drilling/driving needs
- UPDATE: 90 day cash back guarantee (which I ended up using)
Cons:
- LED lighting isn’t as good as the hex chuck version of this drill
- the one handed chuck adds length as equated to the hex chuck version of this drill
- not cheap (but worth the price I think)
- UPDATE: the affect wrench failed after light use
Dewalt was little late in freeing their compact driver drills (Bosch has had one for years), but they actually set themselves apart for the rest with this one.
I think this category of drill is perfective for most homeowners. Bosch, Porter-Cable, Makita, Milwaukee, Dewalt, and others all make ultra compact 12V lithium ion driver/drills. They are all a immense betterment over former choices because:
1) Lightweight: e.g. drilling over you head to hang pictures
2) Lithium Ion Batteries: don’t lose as much charge amongst uses
3) Compact: may fit your drill in tight places
All manufacturers except Dewalt put the battery in the handle which makes for a beefy handle and an off remainder drill. Dewalt puts the battery at the bottom which balances the drill and allows it to have a more ergonomic grip. My wife tried some of the other drills with the battery in the handle and found them awkward to hold because of the size of the grip. She loves this one.
The combining of a lightweight drill with a slim grip makes this the perfective drill for numerous women. Even my kids may use it. My wife hates my Porter Cable 14.4 volt NiCad because it is so darn heavy that she has to use two hands and almost throws out her back doing it. Now my doesn’t have to ask me to do the drilling because she may do it herself comfortably.
Dewalt is a outstanding choice for drill to have around the house that each one may use.
UPDATE: After using the affect wrench to drive in regards to 20 lag screws into wood, it stopped working. It started making an even louder racket and lost all torque. I couldn’t drive anything with it. Luckily, Dewalt has a 90 day gratification guarantee so I returned the set. I could have sent it in for repair, but am thinking I will re-buy the drill only. I didn’t find the affect wrench as useful. Since it has no clutch, it is hard to know if you are exerting the right amount of strength on the screws. The drill was aweinspiring though, so I unquestionably want that around.
If you found this review helpful, let me recognise with your vote. If not, then leave a comment on how I may improve the review.
13 of 15 persons found the following review helpful.
DeWalt vs Ridgid 12V Lithium Combo
By J. Brown
I was attempting to determine amidst HD’s Ridgid R9004N Drill/Impact driver set and the new DeWalt 12V DCK211S2 Drill/Impact driver set for my own home DIY’er use. I like both brands for their reputation, but I was finelooking much set on the Ridgid due to the lifetime warranty. That is until I decisive to head on down to the local HD to undertake them before buying (my HD has a setup with all the drills out where you may run screws into a 4×10).
Both the DeWalt 12V Impact driver and Drill could run a 3″ screw into the board with power to spare. The grips were very comfortable, and the tools were well balanced. And the affect driver was plainly amazing. Why had I never owned one of these before?
The Ridgid was not as comfortable, even though felt bulkier due to a fatter handle, more or less top heavy, and was far weaker than the DeWalt. The drill only managed to run the screw regarding 2/3 of the way in and then stop, shutting itself off. I tried again. It turned possibly once then stopped. Again I tried. It turned a bit then stopped. This time there was a lot of smoke rolling off the motor.
Well, needless to say, I recognise why DeWalt doesn’t need a warranty like Ridgid’s. I purchased the DeWalt, and it was 10% for less on AZ than at HD!!!
See all 46 client reviews…
|