Gb Se 92 Strip Automatic Stripper
The GB 8-22 AWG Strip-Easy Automatic Wire Stripper is an idealisti choice for stripping solid or stranded wire. The stripper strips wires clean with one easy squeeze, up to 7/8-inches thick, and does so without nicking or cutting the wire conductor. For added ease of use, the stripper’s jaws open mechanically to remove wire without crushing wire ends, and the AWG size is distinctly marked at each cutting hole for added convenience. The stripper comes with a 1-year fixed manufacturer’s warranty.
The GB 8-22 AWG Strip-Easy Automatic Wire Stripper is an idealisti choice for stripping solid or stranded wire. The stripper strips wires clean with one easy squeeze, up to 7/8-inches thick, and does so without nicking or cutting the wire conductor. For added ease of use, the stripper’s jaws open mechanically to remove wire without crushing wire ends, and the AWG size is distinctly marked at each cutting hole for added convenience. The stripper comes with a 1-year fixed manufacturer’s warranty.
Strip-Easy’ Automatic Wire Stripper #8 – #22 AWG. Strips solid or stranded wire. Strips wires clean with one easy squeeze, up to 7/8″. Blades cut insulation without nicking conductor. Jaws open mechanically to remove wire without crushing ends. AWG size without doubt or question marked at each cutting hole.
Gb Se 92 Strip Automatic Stripper Image
Gb Se 92 Strip Automatic Stripper Pic
Gb Se 92 Strip Automatic Stripper Photo
Gb Se 92 Strip Automatic Stripper Picture
Most helpful customer reviews
14 of 15 people found the following review helpful.
 How far can you shoot the wire tips?
By Sean P. Logue
Seems like every tool has a built-in wire stripper these days. Crimpers and pliers, I even have a pair of scissors with one. And they’re all pretty crummy strippers, too.
This tool does one thing, and it does it very well. It can strip a wire using only one hand, so your other hand can hold the wire. After the cut, it flicks off the insulation in one smooth motion, which eliminates wrestling with the wire to get the tip off.
It also has a very wide range of gauges that it can do, and it is easy to compare the wire tip with the holes to find the right one. For example, sometimes a 18 gauge stranded wire is “fluffier” than usual, and needs the 16 gauge hole. Even if you guess wrong and use the larger hole, it is easy to put the wire back in and do it again one smaller.
There is one disadvantage, which is that it flicks the insulation end off onto the floor. This is kind of fun while you’re doing it, but then you’ll end up crouching down and trying to find them after it is over (or vacuuming, if you’ve been doing a bunch of them). I used mine to strip a bunch of wires for a car alarm, and had little multicolored tips all over the parking lot when I was done.
Sean P. Logue, 2007
10 of 12 people found the following review helpful.
Love that stripper!
By T-Girl
This stripper is very good to use. I’ve been using it for years in the industrial work area. Clean cut, rarely nicked the wires. Or maybe it was just me 
3 of 3 people found the following review helpful.
 Reasonable price for wire stripper
By B. Wright
Have used the wire stripper a few times. Am happy with it for the price I paid. It could use some design improvements. The lever that opens the cutting blade seems out of place. To use the tool, I usually must open the cutting blade with my other hand before placing the tool on the wire. Would probably select another brand if I know this issue existed, but not sure which brand would work better.
See all 10 customer reviews…
|